29
EN
Models with Smart Loading Sensor
The
"SMART AI - SMART AI PRO"
programme automatically sets the ideal
temperature and washing time, optimising
water and electricity consumption, thanks to
an algorithm that analyses the real-time
dirtiness of the dishes.
Models with dirt sensor
(Only on some models).
The dishwasher is equipped with a dirt
sensor, capable of analysing water
murkiness during all
"AUTOMATIC"
programme phases (see programme
list)
. This device automatically adapts the
wash cycle parameters to the actual
quantity of dirt on the dishes, since water
murkiness is linked to the quantity of dirt on
the dishes. Thus, excellent washing results
are guaranteed while optimising water and
energy consumption.
Some programmes use an impulse or
intermittent washing system (depending on
the model), which reduces consumption,
noise and improves performance.
Opening the door when a programme is
running is not recommended especially
during the main wash and final hot rinse
phases. However, if the door is opened
while a programme is running (for example,
to add dishes) the machine stops
automatically. Close the door,
without
pressing any buttons
. The cycle will start
from where it left off.
If you want to cancel and change a
programme that is already in progress,
proceed as follows:
1.
Open the door.
2.
Press and hold the
"START/RESET"
button for at least 3 seconds.
3.
The countdown appears on the display
"3 -2 -1"
while the
"RESET"
button is
held down.
4.
"RESET"
will appear on the display and
beeps will sound.
5.
The programme in progress will be
cancelled and the
"ECO"
programme,
or the programme you have decided to
use, appears on the display,
memorising it when the dishwasher is
switched on.
6.
At this point you can set a new
programme.
The end of the programme will be indicated
by 3 signals lasting 3 seconds, interspersed
with a pause of 20 seconds, after one
minute the dishwasher will switch off. At the
same time the word
"END"
will appear on
the display for one minute.
End of the programme
WARNING:
Before starting a new programme, you
should check that there is still
detergent in the dispenser. If
necessary, top up the detergent.
Changing a running programme
WARNING:
If you open the door during the drying
cycle, an intermittent buzzer signal
advises you that the drying cycle has
not yet finished.
Interrupting a Programme
The "intermittent" working of the washing
pump is NOT to be considered a
malfunction; it is a characteristic of
impulse washing, and therefore
should be considered a normal feature
of the programme.
"IMPULSE" or "INTERMITTENT"
programmes (only on some
models)
"AUTOMATIC" programmes
