background image

As the top lid opened, the washer will automatically  given  alarm and stop running, exclusively during draining.

4  Close the top lid

The capacity of washing  of  the machine refer to the largest weight of the
standard laundries under dry condition  that can be washed  in one  
 time.  Laundries quantity in  one   washing   cycle    shall  be  lower  than  
 the  standard  capacity.  
The thickness ,size , type of the cloth will influence the actual  washing capacity. 
 It is suitable to put in reasonable amount of laundries and the laundries can be turned
 round in washing for one time washing.  

Do  not  select  "  4"  water  level  for laundries  less than 1.0kg ,so as to avoid 
splashing of water.  

2  Put in the laundries

How to use whitener

How to use washing powder

Washing powder with poor quality or long-time storage may
get caked. Please clean the detergent box duly  in usage.

Dissolve directly inside the washing machine: (not
applicable for fuzzy and reserve program)
1.Add some water(select " 1 " water level). 
2.Add washing powder. Run for about 30s to fully dissolve
   the 

                    Powder. Then push the"START/PAUSE" button.

3.Put in laundries. Select suitable water level. Push the
  "START/PAUSE"

                                     Button again.

Quick dissolving of washing powder:
1.Prepare warm water of 30 C and container.
2. Add washing powder while stirring to dissolve it completely.

It is not recommended to use rich-foam washing powder.

3  Usage of detergent

If you select 

program, it is suggested to use

liquid detergent instead of washing powder to guarantee
the washing effect.

"Speedily"

 

Please add suitable washing powder as per the laundries
 quantity, the set water level and water quantity.

It is suggested to add washing powder into the box
directly under fuzzy program and reserve program.

The whitener shall not touch laundries directly.

Add water to stipulated level. Dilute the whitener with container, 
and then pour it into the liquid whitener inlet slowly.
Laundries with color or pattern is not colorfast, thus not applicable. 

For whitener in powder, dissolve it before use.

See to the manual of whitener for the usage and dosage.

Confirm if there's 
special requirement 
for the laundries.

Clear the pocket.
Take out the coins ,
sand, hairpins etc.

Fasten the buttons 
and zippers.

When the pulsator is 
running ,the buttons of 
the laundries may cause
noise. For the sake of 
discretion ,please put
 the  laundries with
 buttons into other
 laundries.

The quantity of the 
 laundries shall not
 exceed the rated 
 value. The big
 laundries like the
 jeans shall be put 
 in loosely.

a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries with unfast color from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,
    please apply detergent in advance, which can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.
f.  Do not put those laundries polluted by chemicals directly into the washing machine.
g. For  those  small  laundries and those may get twisting or worn,  and woollen/fur laundries,  please put them into 
    mesh bag for washing.

1  Preparation before washing

Preparation before washing

1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed
  reliably. Then insert the power plug into the 
  receptacle. Do not connect the earth terminal 
  to the gas pipe and tap water pipe.  
3.Put down  the drain hose.

4.Slanting or uneven ground may result in 
   unstable working or abnormal noise. Please
   make the machine stand horizontally.

Pay attention to followings before washing the laundries 

When choosing the " No detergent"  program, the usage of  
softener or whitener is same as using detergent. 

The usage and dose of the softener as per the specifications of 
softener.
Before washing put the softener into the filling entrance The softener
will put into the washer when rinsing. 
After the softener is put in, please don't place for a long time otherwise
softener may solidify and cause flowing not smooth. 
When the washer in spin process please don't push "START/ PAUSE "
 button for fear that the softener is put in earlier, which affect the effects. 

How to use the softner

Control  panel  seat

Washing powder inlet

Detergent box

Softner 

inlet

Liquid detergent inlet

Summary of Contents for XQS80-828











Reviews: