manualshive.com logo in svg

Haier XQBM22-C, Service Manual, Page: 9 / 18

Share
Download
Haier XQBM22-C Service Manual Download Page 9

INSTALLATION AND ACCESSORY PARTS

The part of control panel seat

1)Method of opening the control panel
A.Open the back cover. Loosen the  locking belt fixed on the cabinet (used   
    in inner wiring), to loosen the inner wiring.
B.Loosen the four screws used to install the control panel seat (rear and side). 
    Lift the rear upwards. Loosen the control panel seat from the inlay of the 
    cabinet. Then move it forwards several times. Turn the control panel seat 
    backwards to open it gently. Do not open by force.

Do not lift the control panel seat by force, otherwise the safety switch 
control rod may get transformed, and the jointer part of the connecting pipe 
of the water level sensor may be loosened, therefore influence the normal 
operation of the microswitch and water level sensor.
After opening the control panel seat, hold it with one hand or lean it on 
supporter like the wall. Do not put it down.

Attention:

The cabinet and outer tub component

1) Method of disassembling

A.Loosen the two motor bolt unit to dismantle the motor. To adjust the tension 
of 
    the belt, loosen the bolts and move the motor left and right.
B.Loosen the four fastening screws to dismantle the delivery shield.
C.Loosen the two fastening bolts to dismantle the drain motor.
D.In dismantling the drain valve, first loosen the screws, then rotate 
    combination part with the drain hose, overflow hose and outer tub slowly to 
    make it loose. Then dismantle the drain valve.
E.In dismantling the inner tub, first take off the outer tub cover, then dismantle 
    the pulsator, finally dismantle the inner tub. Handle with care when taking 
    the inner tub off from the outer tub.

2) Points of attention in assembly

    In installation of the drain valve, please smear a piece of 801 glue at the 
    connection part between the drain valve and outer tub and between the 
    overflow hose and drain hose to guarantee that the drain valve will not leak.
    In fastening the screws, make it tight without sliding.
    Take care not to scratch the cabinet and influence the appearance of the 
    Machine.

2)Points of attention in assembly
    Fix the wiring in the control panel seat to its original position. Do not make it 
    touch sharp corner and mobile position. The space surrounding the 
computer 
    sequencer is rather narrow. Please dispose it carefully and do not make the 
    transformer press the wires.
    Confirm that the control panel seat is installed to proper position of the 
    cabinet. Pay attention on the adjusting of the gap between the control panel 
    seat and the cabinet.

Summary of Contents for XQBM22-C



















Reviews:

No comments