background image

¡

¡

¡

.7.

.8.

It is important to try and run the dishwasher when it is fully

   loaded to save on enery. In order to prevent odors from forming

  and food from caking onto the dishes, you can run the hold cycle.

- Choose the right wash cycle: the choice of cycle depends on

  the type of dishware, cookware and utensils being washed and

  how dirty they are.

Energy Saving Tips

- Use the right amount of detergent: if you use too much detergent,

  the result will not be  cleaner dishes,but,rather,a greater nega

  tive  impact on the enviroment.

- There is no untility in rinsing dishes ,cookware and untensils

  before placing them in the dishwasher.

How to Keep Your Dishwasher in Shape

After Every Wash

After every wash, turn off the water supply to the appliance and

leave the door slightly ajar so that moisture and odors are not

trapped inside.

Remove the Plug

Before cleaning or performing maintenance, always remove the

plug from the socket. Do not run risks.

No Solvents or Abrasive Cleaning Products

To clean the exterior and rubber parts of the dishwasher, do not

use solvents or abrasive cleaning products. Rather, use only a

cloth and warm soapy  water.

To remove spots or stains from the surface of the interior, use a

cloth dampened with water and a little white vinegar, or a clean-

ing product made specifically for dishwasher.

When You Go on Holiday

When you go on holiday, it is recommended that you run a wash

cycle with the dishwasher empty and then remove the plug from

the socket, turn off the water supply and leave the door of the

appliance slightly ajar. This will help the seals last longer and pre-

vent odors from forming within the appliance.

Moving the Appliance

If the appliance must be moved, try to keep it in the vertical position.

If absolutely necessarty, it can be positioned on its back.

Seals

One of the factors that cause odors to form in the dishwasher is

food that remains trapped in the seals. Periodic cleaning with a

sponge will prevent this from occuring.

Wash Cycle Table

Cycle

Cycle Selection

Information

Description of Cycle

Detergent

Heavy Duty

Normal Wash

IEC-EN 50242

Rinse

Soak

Very dirty dishes, pots and

pans. (not to be used with

delicate items)

Normally dirty dishes, pots

and pans. Standard daily

cycle.

For dishes that need to be

rinsed and dried only.

Pre-wash of dishes, pots and

pans while waiting for the load

to be conmpleted after the

subsequent meal

.

Pre-wash with hot water at 50

.

Extended wash at 55

Rinse with cold water.

Rinse with hot water at 60

Drying.

Short cold wash to prevent

food residue from drying on

the dishes.

30g

30g

GB

GB

Extended wash at 55

Rinse with cold water.

Rinse with hot water at 60

Drying.

Rinse with cold water.

Rinse with hot water at 60

Drying.

Rinse Aid

Summary of Contents for WQP12-PHS







Reviews: