.5.
Loading the Dishwasher
Before placing the dishes in the dishwasher, remove the large food
particle to the prevent the filter from becoming clogged,which re-
sults in reduced performance.
If the pots and pans have baked-on food that is extremely hard to
remove, we recommend that they be allowed to soak before they
are washed.This will eliminate the need for extra wash cycles.
Pull out the rack to facilitate loading the dishwasher.
How to Use the Lower Rack
We recommend that you place the most difficult to clean items on
the bottom rack:pots ,lids,serving dishes and bowls,as shown in
the figure to the right.
It is preferable to place serving dishes and lids on the sides of the
racks in order to to avoid blocking the rotation of the top spray
arm.
- Pots,serving bowls,etc.must always be placed top down.
- Deep pots should be slanted to allow the water to flow out.
- The silverware basket can be doubled(see fig. A) so that only
one section may be used when the silverware load is light. this
also makes space for additional pots and pans,and it can also be
placed in the upper rack.
- Silverware should be placed in the silverware basket with the
handles at the bottom;if the rack has side baskets,the spoons
should be located individually into the appropriate slots.Espe-
cially long utensils should be placed in the horizontal position at
the front of the upper rack.
How to Use the Upper Rack
The upper rack is designed to hold more delicate and lighter
dishware,such as glasses,coffee and tea cups and saucers,as well
as plates,small bowls and shallow pans(as long as they are not
too dirty).
Position the dishes and cookware so that they do not get moved
by the spray of water.
The upper rack can be adjusted for height by using the knobs
located on the sides of the rack itself(see fig.B).
Bottom Rack
Top Rack
Load for 12 Standard Settings
GB
fig.A
fig.B
2
1
3
4
