Install the bottom plate
Install the lint filter
Adjust the Installation position
Screw
Back
Front
bottom plate
Soft object
Please install and adjust the machine according to the requirement of the mannual.
It is very important to your security and correct operating the machine.
Before Using
Before Using
Installation and adjustment
After open the package, please lean the
washing machine gently down to soft
items (towel cloth, blanket, etc.). Install the
bottom plate to the bottom of the machine
with the eight screws by a cross
screwdriver, then lift the machine up gently.
See to the figure.
The washing machine away from wall should be overrun 20mm.The largest allowable slope of the shank base of
the machine is 2
.The slanting or rough ground will result in unstable running or stoppage of the machine.
Please adjust it with following methods:
Confirm it's horizontal:
Hang the lead line to check if it is
horizontal.
Adjust the adjustable foot:
Fasten
Loosen
High
Low
the adjustable nut
the adjustable foot
1 .To twist the adjustable leg, please first lift up the
side of the foot slightly, loosen the adjustable nut,
and twist the foot.
2 . After adjustment, fasten the nut.
Install the lint filter in the balance ring.
(See to the right figure)
Install