background image

8

Operation Guide

When the mode selection switch is turned to "        " or "      " ,
the  air conditioner will only blow out air without cooling.

If the mode selection switch is turned from cooling mode to fan

mode, do not turn it back until at least 3 minutes have elapsed.

<1>

<2>

<3>

<4>

<5>

When set to "         ", fan motor runs  at high

speed to blow out strong air.

When set to "         ", fan motor runs  at low speed

to blow out gentle air.

When set to "        ", air conditioner will start

cooling at low speed, blowing out gentle air.

When set to "        ", air conditioner will start

speedy cooling, blowing out strong air.

When set to "      ", air conditioner stops running.

Mode selection switch controls the fan motor

speed and cooling speed.

Hint

When the switch is set to "    ", the indicator lights

up, and vertical louvers will swing from side  to side,

delivering gentle air thus making you feel very

comfortable. When it is set to "     ",  the indicator

goes out, and the vertical louvers stop at any position.

Auto air deflector switch

Mode selection switch

Auto swing

Mode selection

Summary of Contents for THW18C T3
















Reviews: