Haier T13, Service Manual

Page: 66 / 70

Service manual
T13
66
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
ERROR CODE ERROR DESCRIPTION CONTROL
F5
Inadequate water supply
•
Make sure the water input tap is totally open and that there is no water cut.
•
Close the water input tap, separate the water input hose from the tap and clean the filter at
the connection end of the hose.
•
Restart your machine, contact the service if the error resumes.
F3
Error of continuous water input
• Close the tap.
• Contact the service.
F2
The waste water in the machine cannot be
discharged.
• Water discharge hose is clogged.
•
The filters of your machine might be clogged.
•
Power off-on your machine and activate the program cancellation command.
•
If the error continues, contact the service.
F8
Heater error
Contact the service.
F1
Alarm is active against water overflow
•
Power off your machine and close the tap.
•
Contact the service.
FE
Faulty electronic card Contact the service.
F7
Overheating error (temperature in the machine is
too high)
Contact the service.
F9
Divisor position error Contact the service.
F6
Faulty heater sensor Contact the service.