background image

Press [MENU] button, and select PICTURE menu.
Press [-CH+] buttons, and select an item. 
Press [-VOL+] buttons to adjust the value of the item function.

Brightness  adjustment:
Press  [-CH+]  buttons  to  select  BRIGHT  item.
Press  [-VOL+]  buttons  to  adjust  brightness.
Contrast  adjustment:
Press  [-CH+]  buttons  to  select  CONTRAST  item.
Press  [-VOL+]  buttons  to  adjust  contrast.
Colour  adjustment:
Press  [-CH+]  buttons  to  select  COLOR  item.
Press  [-VOL+]  buttons  to  adjust  colour.
Sharpness  adjustment:
Press  [-CH+]  buttons  to  select  SHARP  item.
Press  [-VOL+]  buttons  to  adjust  sharpness.
Background  selection:
Press  [-VOL+]  buttons  to  select  a  background  on  or  off.

PICTURE ADJUSTMENT

CONTRAST     100
BRIGHT            50
COLOR             50
SHARP              50     
B.B                     OFF

   

SELECT     ADJUST

PICTURE

9

VHFL VHFH UHF

TUNING PROCEDURE

   (1)Press [MENU] button, let TUNING menu display on the screen. 
   (2)Press [-CH+] buttons, and select SEARCH item.
   (3)Press [-VOL+] buttons to change channel number into pointed channel 
        number.
   (4)Press [-VOL+] buttons, when the TV set  has searched a program, stop 
       searching, if the program isn't the one you need, press[-VOL +] buttons
       again, the set will search continually until it has searched the program you 
       need. And pointed program is stored in pointed channel.
4.Selecting band
   In the semi-auto search mode, if  the signal you want to search isn't on
   the present band, you can change the band to improve searching speed.
   (1)Press [MENU] button, let TUNING menu display on the screen.
   (2)Press [-CH+] buttons to select BAND item.
   (3)Press [-VOL+] buttons to select the band you need.

5.Fine tuning
   Because of some reasons, if auto searching effect of program
   isn't good, please fine tune your TV set.
  (1)Press [-CH+] buttons to select MFT item.
  (2)Press and hold [-VOL +] buttons until the effects of the picture
      and audio  are good. 

6.Skip
   The function can skip the TV program which you  don't need. 
   (1)Press [-CH+] buttons or numeric button, select the program 
        number which you want to skip. (for example: channel 002)
   (2)Press [MENU] button to select TUNING  menu.
   (3)Press [-CH+] buttons to select SKIP item.
   (4)Press [-VOL+] buttons to preset SKIP ON mode. 
Note: When a certain program number is in SKIP ON
          mode, the program number will not appear when you select 
          program with the [-CH+] buttons, but program number will
          appear with numeric button. When a certain program number
          is in the SKIP OFF mode, the program number will appear 
          when you select program with the [-CH+] buttons.

8

Summary of Contents for RGBTV-21TA











Reviews: