Haier PGT2.0-2, Installation Manual, Page: 14 / 35

14
Step 2: Prepare the collector connector 3, drill holes on its bottom and fix it with bolt 4.
Step 3: Fix the drilled channel steel 1 and collector connector 3 with bolt 5.
（
2
）
Put tile back to its original place when the collector connector is assembled.
（
3
）
Fix the channel steel with collector connector with bolt 5, mount the collector fixing hook 2 onto the lower
channel steel, cushion them with rubber pad 4, mount plate collector 1 onto it, hook the lower edge of the plate
collector 1, fix the upper edge with the fixing hole on the outer frame, and connect plate collector and the fixed
channel steel with bolts.