Haier PGT2.0-2, Installation Manual, Page: 12 / 35

12
1:Channel steel 2:Collector fixing hook 3:Collector connector
（
There is a wrong mark in the
drawing
）
4:Wood screw 5:Angle iron piece 6:Bolt 7:Nut
Step 1: Remove the tile from the place where the plate collector shall be mounted and fixed.
Step 2: Prepare angle iron pieces 5 (L40*70*120*4); fix them onto the roof beam with wood screw 4 after drilling
its side wall;
Step 3: Weld the bent collector connector 3 onto the angle iron piece 5 (they can be weld prior to mounting them);
Step 4: Connect the drilled channel steel 1with collector connector 3 with bolt 6.
②
How to connect and fix the prepared bolt