![background image](http://html1.mh-extra.com/html/haier/ltf42m1c/ltf42m1c_service-manual_3961846012.webp)
12
1.
Menu Language:
To select the on-screen display menu language.
2.
Picture Format:
To select the available display format from Auto, Normal, Native (HDMI only), Zoom 1, Zoom2,
or Wide.
3.
Time:
[Time Zone]
- To select the time zone you are in.
[Time]
- To set the time and date or select auto synchronization.
Tip: Before you want to set the time and date by your own, please make sure Auto synchronization is Off.
[Sleep Timer]
- To set the TV to turn itself off within a certain time.
4.
Subtitle:
[Analog Subtitle]
- To display the transmitted subtitle on the screen. Either this text can be permanently displayed
(assuming that the service is available in the broadcast) or only when mute is active.
[Digital Subtitle]
- Use the Digital Subtitle function when two or more subtitle languages are broadcasted. If subtitle
data in a selected language is not broadcasted, the default language subtitle will be displayed.
[Subtitle Type]
- To choose the subtitle type from normal or hearing impaired.
5.
Teletext Language:
[Digital Teletext Language]
- To select the teletext language.
[Decode Page Language]
- To set the teletext language to the regional location.
6.
Comon Interface:
This menu appears with your CI supplier information.
7.
HDMI Scan Info (HDMI only):
[Automatic]
- Set to underscan or overscan automatically when the video signal is detected.
[Underscan]
- When the video signal is detected, all active pixels and lines are displayed with or without border.
[Overscan]
- When the video signal is detected, some active pixels and lines at the edges are not displayed.
8.
Reset Default:
To reset all TV settings to the original factory values.
Parental Menu
Enable you to control special functions for the TV channels.
1.
Channel Block:
To block certain TV channels.
2.
Parental Guidance:
To control access programs based on their age ratings. All settings apply to digital channels.
Summary of Contents for LTF42M1C
