Introduction
INSTALLATION
CAUTION
*Locate the TV in the room where light
does not strike the screen directly.
*Total darkness or a reflection on the
picture screen can cause eyestrain. Soft
and indirect lighting is recommended for
comfortable viewing.
*Allow enough space between the TV and
the wall to permit ventilation.
*Avoid excessively warm locations to
prevent possible damage to the cabinet or
premature component failure.
*Do not cover the ventilation openings
when using theTV.
Never tamper with any components inside
the TV, or any other adjustment controls
not mentioned in this manual. All LED-TVs
are high voltage instruments. When you
clean up dust or water drops on the LED
PANEL or CABINET, the power cord should
be pulled out from the receptacle, then
wipe the TV with a dry soft cloth. During
thunder and lighting, unplug the power cord
and antenna cord to prevent damage to
your TV. All repairs to this TV should only
be performed by qualified TV service
personnel.
02
P.05
Panel
TV System
PAL-B/G
、
I
、
D/K
SECAM- B/G
、
D/K
、
L
、
L
Video Signal System
PAL/SECAM
Input Power Voltage
AC 100V-240V 50/60Hz
Power consumption
Audio Output Power
（
THD 7%
）
2x8W
Signal Input
Analog RGB(PC) x1; PC audio x1
High-Definition Multimedia Interface
(HDMI)x2
Video Input x1
Audio Input x1
Y Pb Prx1
SCARTx1
Horizontal definition
（
TV line
）
Composite Video
input >=350
YPbPr
>=400
31.5
120W
Main parameter
Main features
1
Used as Television, display terminal,
PC display
；
2 High luminance, wide viewing
Angle
；
3 Time-shift
4 HDMI interface and SCART
Interface
；
5 NICAM
；
'
CI x 1
USB x 1
Tuner x 1
180W
42
