Using the features
Digital LCD Television Instruction Manual EN-30
Note
The system will format the whole device and if your
O
device size is bigger than 1GB, you can set the size
which is used for time shift.
Format may take several minutes and the time is
F
depending on the memory size. Press
button
to select the Time Shift Disk Size. The max device size
for Time Shift is 8GB. Then, press
OK
button to save.
Note
If you select all the size format for time shift, you
O
can not do any recording.
Waiting for the system checking. And you can see
G
the speed data after the success checking.
Note
Only have to format when you use the device for
O
record for the first time.
The minimum device size for record is 1GB. Provide
O
device formatting function is up to 2TB. The max
Multi-Partition is 16 partitions and one is active at
a time.
Bit rate:
O
Device bit-rate>4.5MB/s REC is safe at HD
t
stream
Device bit-rate>1.5MB/s REC is safe at SD
t
stream
Device bit
t
-rate<600KB/s REC is bad for REC
The system can not work normally if the USB
O
device have the listing problem below:
The device has bug.
t
The device has error block.
t
The device reports the unfaithful size.
t
IMPORTANT
USB device should be format as FAT32 format by
t
your PC before insert to the USB connector.
TIME SHIFT
Time Shift function is only available in DTV mode. Press
PLAY/PAUSE
to pause the program, and press
PLAY/
PAUSE
again, the time shift program will be played. If
you want to stop time shift function, press the
STOP
button.
You can stop the time shift program being played by
pressing the
STOP
button.
RECORDING
Press
A
D.MENU
button to record the program being
played, and press
D.MENU
or
EXIT
button to make
the recording interface minimum.
Press
B
STOP
button to stop the program recording
being played.
For Playback the recorded program. Press
C
INDEX
button to open the recorded list.
