background image

NOTE:

1).Tint is available in NTSC system only.
2).There are four color temperature modes
can be selected, such as normal, warm, cool, and user.
3).Screen is available in PC mode only, which 
can adjust horizontal position, vertical position, 
size and phase.

-12-

 TV OPERATION

3. SOUND MENU

The third item of the MENU is the SOUND
MENU.
You can adjust the sound effect here such as
treble, bass, balance etc.
Press 

▼▲

 to move, press OK button to confirm, 

and press

◀▶

 to adjust.

Note:

Auto volume: only available when the input
signal volume is too large or distortion.

4. TIME MENU

The fourth item of the menu is the TIME MENU
You can adjust the clock, power on/off time,
sleep time etc.
Press

▼▲

to move, press OK button to confirm, 

and press

◀▶

to adjust.

NOTE:
Within 15 minutes there is no signal, the TV
will auto sleep. 
Once you power off the TV set by AC, the clock time 
will be reset.

5. OPTION MENU
The fifth item of the MENU is the OPTION MENU.
You can adjust the OSD Language, Restore Factory 
Default, Blue Screen or HDMI CEC.

Sound

 

Mode

Balance

Auto Volume

Surround Sound

MENU

Back

Move

OK

OK

Movie

Sports

Music

Standard

CHANNEL

PICTURE

SOUND

TIME

OPTION

User

Clock

OK

Off Time

On Time

Sleep Timer

Auto Sleep

CHANNEL

PICTURE

SOUND

TIME

OPTION

MENU

Back

Move

OK

OK

OSD

 

Language

Restore

 

Factory

 

Default

Blue

 

Screen

HDMI

 

CEC

MENU

Back

Move

OK

OK

CHANNEL

PICTURE

SOUND

TIME

OPTION

NOTE:
Restore factory default will clear all the programs
and reset all the settings to default value.

6. USB FUNCTION

You must enter the Source menu first,then choice the 
USB and press OK button,the USB menu will appear.

Please make sure that the USB device have plugged in 
the slot. There are four type media item can be selected, 
such as photo, music, movie and text. Select the type 
media item by pressing

◀▶

, press 

OK

 button to enter 

the disk selection menu.

In the movie mode, when you use FB, FF function, The 
audio may be pause in several seconds to synchronize 
the audio signal and video signal.
In text mode, press          to make page up and page down.

NOTE:
When the USB device isn't supported, it may be that the 
power of the USB device isn't enough.

PHOTO

MUSIC

TEXT

MOVIE

Haier Innovation Life

USB2.0

Back

EXIT

Move

Select

OK

OK

Input

 

Source

TV

YPBPR

PC

HDMI1

VIDEO

USB

HDMI2

Summary of Contents for LE55B8000


















Reviews: