-19-
TV OPERATION
2.Record the program
3.Play the record
As playing the DTV source, choose the channel
and click “
record”, the record frame will pop up. Click
”
record” again, the record frame will disappear and
the “REC” icon still on the left top. It will disappear until
you click “stop”.
●
●
The program recorded on the “USB”will be
saved in the folder “_MSTPVR” on the
device.
1.The USB storage size can be between
128MB and 500GB in size, but for practical use 2GB to
500GB is recommended.
2. Video may become pixelated when Video
bit rate is too low. This can be caused by connecting a
USB extension cable instead of plugging the USB
directly into the TV
3. Not all USB devices are compatible.
Below is a list of recommended USB drives.
Models that are not listed may be compatible, but it is
not guaranteed to work.
The USB support list are the same as Timeshift
function,see the following pages for details.
Please do not unplug the USB storage device
when the Time Shift function is activated.
Approximately 4GB of memory buffers
about offer 140 minutes.
Prepare to record the program
This TV allows you to pause and record the
currently watched digital program to a USB
storage device, and to resume to the point
where it was paused.
Formatting a USB 2.0 storage device will
be needed. Save your original data
before formatting. All the data stored in
the USB device will be erased after
formatting.
USB Drive Storage Format
Select to format the USB device and allocate the
amount of space for the Time Shift function.
The format process will take at least 2
minutes. Please do not turn off the power or
remove the USB device during formatting.
During formatting, a speed test will be done
on the USB device. If it fails, it means the USB
device may not support the Time Shift
function.
Record a paused DTV program to
USB storage device
9.Timeshift function
1. While in the DTV input source, insert
USB storage device to the USB port on the
side of your TV.
2. Press Play/Pause 14 / 24 to start Time Shift
function. The TV program paused. The Time
Shift OSD appears, and starts recording.
3. Press STOP 15 to stop Time Shift
function and stop recording program.
22
24
23
25
Summary of Contents for LE32K6000T
Page 25: ...4031Q325099 ...
