background image

-2-

SAFETY AND WARNINGS

IMPORTANT SAFETY INSTRUCTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 
NOT  REMOVE COVER (OR BACK).NO  USER 
SERVICEABLE PARTS INSIDE. REFER SERVICING 
TO QUALIFIED SERVICE PERSONNEL.

CAUTION

The symbol indicates that dangerous 
voltages  constituting a risk of electric shock 
are present within this unit.

The symbol indicates that there  are 
important operating and maintenance 
instructions in the literaturaccompanying this 
unit.

To reduce the risk of fire or electric shock, do 
not expose this apparatus to rain or moisture.

WARNING:

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install 
in accordance with the instructions.
8) Do not install near any heat sources such as 
radiations, heat registers, stoves, or other 
apparatus (including amplifiers) that produce 
heat.
9) Do not defeat the safety purpose of the 
polarized plug. If the provided plug does not fit 
into your outlet, consult an electrician for 
replacement of the obsolete outlet.
10) Protected the power cord from being walked 
on or pinched particularly at plugs, convenience 
receptacles, and the point where they exit from 
the apparatus.
11) Only use attachments/accessories specified 
by the manufacturer.
12) Unplug this apparatus during lighting 
storms or when unused for long periods of time.
13) Refer all servicing to qualified service 
personnel. Servicing is required when the 
apparatus has been damaged in any way, such as 
power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the 
apparatus, the apparatus has been exposed to 
rain or moisture, does not operate normally, or 
has been dropped.
14) Mains plug is used as the disconnect device, 
the disconnect device shall remain readily 
operable.
15) The ventilation should not be impeded by 
covering the ventilation openings with items, 
such as newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted 
candles, should be placed on the apparatus.
17) Attention should be drawn to the 
environmental aspects of battery disposal.
18) The use of apparatus in moderate climate.
19) The apparatus shall not be exposed to 
dripping or splashing and that no objects filled 
with liquids, such as vases, shall be placed on 
the apparatus.

This symbol indicates that this product 
incorporates double insulation between 
hazardous mains voltage and user accessible 
parts. When servicing use only
 identical replacement parts.

This marking indicates that this product should 
not be disposed with other household wastes 
throughout the EU. To prevent possible harm to 
the environment or human health from 
uncontrolled waste disposal, recycle it 
responsibly to promote the sustainable reuse of 
material resources. To return your used device, 
please use the return and collection systems or 
contact the retailer where the product was 
purchased. They can take this product for 
environmental safe recycling.

The batteries shall not be exposed to 
excessive heat such as sunshine, fire or the 
like.

WARNING:

RISK OF ELECTRIC SHOCK
          DO NOT OPEN!

CAUTION

Summary of Contents for LE32K6000D





























Reviews: