Haier LE32C800C, Instruction Manual

Page: 17 / 192

Operation
EN-16
3). Press the ◀▶ buttons to select Antenna Type to Air
means DVB-T.
5). In the Mode item, press the ◀▶ buttons to select tune
mode: ATV / DTV / DTV + ATV. Press the ▼ button to select
Start to start.
Channel
Picture
Audio
Clock
Setup
Lock
Antenna Type Air
Country Germany
Mode DTV+ATV
Start
MENU Move OK OK
6). Channel tuning will commence. This operation may take
up to 6 minutes. The display will show the progress of the
tuning and the number of channels found.
7). If you want to skip the DTV tuning, press the MENU
button to interrupt the tuning half way. You will then go
straight toATV tuning. You may repeat the above step if
you also want to skip the ATV tuning. An installation
reminder will appear the next time you turn on the TV,
if no channel is found.
8). After tuning is complete, the channels are arranged in a
preset order. If you wish to skip channels, modify the preset
order or rename channels, select P rogramme Edit under the
channel menu.
Channel
Picture
Audio
Clock
Setup
Lock
MENU Move OK
OK
Scanning Ch12
Digital Channels Found:
DTV: 3
Radio: 0
Data: 0
Analog Channels Found: 0
1.2 )Auto Tuning (DVB-C)
1). Press the MENU button and then press the ▼▲
buttons to select the CHANNEL menu and then
press the OK button.
2). Press the ▼▲ buttons to select Auto Tuning and
then press the OK button,select Antenna Type to cable
mean DVBC.
3). Press the ▼ button and then press the ◀▶ ▼▲ buttons
to select the country you will operate the TV.
Channel
Picture
Audio
Clock
Setup
Lock
Antenna Type Cable
Country Germany
Mode DTV+ATV
Start
MENU Move OK OK
Channel
Picture
Audio
Clock
Setup
Lock
Quick
Full
Advanced
MENU Move OK OK
4). In Country mode, press the ◀▶ buttons to select the
country where you will operate the TV.
4). In the Mode menu, press the ◀▶ buttons to select ATV /
DTV / DTV + ATV.
5). Channel tuning will commence. This operation may
take up to 6 minutes. The display will show the
progress of the tuning and the number of channels
found.
6). If you want to skip the DTV tuning, press the MENU
button to interrupt the tuning half way. You will then go
straight to ATV tuning. You may repeat the above step if
you also want to skip the ATV tuning. An installation
reminder will appear the next time you turn on the TV,if no
channel is found.
7). After tuning is complete, the channels are arranged
in a preset order. If you wish to skip channels, modify
the preset order or rename channels, select Programme
Edit under the channel menu.