![background image](http://html.mh-extra.com/html/haier/lc-3710d/lc-3710d_operating-instructions-manual_138180005.webp)
7
PREPARATION FOR REMOTE CONTROL
3
2
1
+
+
Remote control installation
1. According to the figure display below, place the remote control with face down,
then open the cover of battery apartment.
2. As in the figure display below, install two AA batteries. (The + and - symbol of
battery must match with the marks on the remote).
3.Close the cover of battery apartment.
Cautions for using remote control
Confirm there is no object between the
remote control and the remote sensor
of TV set.
Sunshine or other strong light will
interfere the signal sent by the remote
control. In this situation turn the TV
set to avoid the direct light source.
Do not put the remote control in direct
heat or a damp place, or potential
damage to the remote may occur.
Please use two AA 1.5V batteries.
Do not mix battery types.
Install the batteries as the correct
polarities.
Do not use the rechargeable batteries.
6
BASE ASSEMBLY METHOD
(1)Take out the complete set from the packing box.
(2)Take out the base column from the packing box.
(3)Take out the soleplate from the packing box.
(4)Take out six M4
×
20 screws from the accessory bag(twelve screws in all).
(5)Use six M4
×
20 screws to tighten the column on the soleplate.
(6)Use six M4
×
20 screws to tighten the base on the complete set.
Note:
The arrow indicates the position of screw.
Soleplate
Column
Complete set
Summary of Contents for LC-3710D
Page 3: ......