Basic Receiving and Playing Operations
22 LCD television Owner’s Manual
equipment to the above-mentioned file system.
To achieve smooth playing, ensure the following:
C
The file code rate should be lower than 300KB/S;
•
Due to the limitation of USB signal transmission
•
distance, it is recommended not to use USB patch
cord, in case of using the cord, make sure that its
length is not over 1m;
Use high-speed USB equipment in conformity
•
with USB2.0 full speed Interface Standard; If USB
equipment in conformity with USB1.1 full speed
Interface Standard is used, the playing may be
unsmooth.
When connecting/removing the USB
device
Press
A
INPUT
on the remote control unit to select
USB option.
Insert USB equipment into corresponding USB
B
interface 2s after starting the system.
After entering the system menu, press
C
3
/
4
on the
remote control unit to select the require USB files,
press
OK
button to confirm the selection and enter
the file list relative to the selection.
Press
D
5
/
6
on the remote control unit to select the
required file, press
OK
button to enter the selected file.
To exit the streaming media playing system and
E
watch a TV program, you must press
BACK
button to
return to the streaming media main menu at first (to
protect equipment), and then press
BACK
to return
to source you previouslywatched.
Note
While playing the USB, press
▲
BACK
button
repeatly, the screen picture will return to USB main
interface, and only at this time you can switch
corresponding signal sources by pressing
INPUT
again.
Please do not unplug the USB device when the
▲
connected USB storage device is working. When such
device is suddenly separated or unplugged, the stored
files or the USB storage device may be damaged.
Operating the USB device
Press
A
3
/
4
to scroll through main menu or submenu
and select your desired option.
Press
B
OK
to confirm your selection.
Press
C
/
to achieve the FWD (fast forward) and
REV (fast back) of the option being played.
Press
D
to play, and press it again to pause playing.
Press
E
ZOOM
to magnify pictures; when the picture is
enlarged, press
3
/
4
and
5
/
6
to move the picture.
Press
F
BACK
repeatedly to return to the main menu.
Press
G
STOP
to stop playing a music.
Note
You can choose the photos or music in different
R
files to play together.
Playing a Picture
After entering USB main interface, press
A
3
/
4
to
select
PHOTO
item.
Press
B
OK
to confirm the selection and enter the
picture file list.
Press
C
3
/
4
to select the picture you want to play,
press
OK
to confirm, and then press
OK
button to
play the pictures.
If you want to pause the picture which is being
D
palyed, press the button again.
Press
ZOOM
to magnify the picture. When the
picture is enlarged, press
3
/
4
and
5
/
6
to move
the picture.
To exit playing, just press
E
BACK
repeatedly.