Basic Receiving and Playing Operations
LCD television Owner’s Manual 17
The intermediate value is 0. When indication value
of Balance increases 10, sound of the right
and left speakers becomes stronger and weaker,
respectively. When indication value of Balance
decreases toward -10, sound of the right and left
speakers becomes weaker and stronger.
Digital tone
▲
This select the modes for sound reproduction dependent
on the broadcast signals or signals from external inputs
received.
Select the mode of sound (Standard/Music/Theater/User).
If the User mode is selected, press OK to enter the
digital tone menu,(as shown in the below figure),
and then press
VOL-
/
VOL+
to select a benchmark in
the range of 50~15K from bass to treble, afterwards
press
CH+
/CH-
to adjust, if a different benchmark is
selected for adjustment, the original adjustment data
will be automatically cleared.
Surround
▲
The surround sound feature expands the audio
listening field wider and deeper to create exceptional
sound quality from the TV’s speakers. Press
VOL-
/
VOL+
to select On or Off.
AVL (Automatic Volume Limit)
▲
This will reduces the differences in volume level
among broadcasters.
Bass
▲
To adjust the super bass. Press
VOL-
/
VOL+
to select
super bass Off/Low/High.
Spatial
▲
Select the sound mode adapt to your space. press
OK
/
VOL+
to enter the menu bar. Press
CH+
/CH-
to
select Stereo/1M/2M/4M.
Reset
▲
Return to factory default settings. Press
VOL-
/
VOL+
to
select OK or Cancel, Press OK to affirmance.
Timer Functions
Setting of Current Time
The current time is calculated from the moment upon
turning the TV on. At first, check whether the time
indicated on the TV's clock is consistent with the standard
time of your time zone; if not, adjust the clock as follows:
Press
A
MENU
on the remote control unit or
MENU
on the TV’s front panel to display the main menu, and
then press
CH+
/CH-
to select the Timer menu, Press
OK
/
VOL+
to enter, afterwards press
CH+
/CH-
to
select the Current Time option.
Press
B
VOL-
/
VOL+
to set hour and minute.
Press
C
CH+
/CH-
to adjust the time.
After finishing time setting, press
D
OK
or
MENU
to confirm.
Setting of ON/OFF Time
This function allows the TV to automatically turn on or
enter standby mode upon reaching the preset time.
Press
A
MENU
on the remote control unit or
MENU
on
the TV's front panel to display the main menu, and
then press
CH+
/CH-
to select the Timer menu, press
OK
or
VOL+
to enter, afterwards press
CH+
/CH-
to
select the On Time or Off Time option.
Press OK to enter the setting screen, and then press
B
CH+
/CH-
to select ON or OFF, if you select ON, press
VOL-
/
VOL+
to set hour and minute. ON indicates
the On/Off Time function is enabled while OFF
indicates the function is disabled.
Timer