Basic Receiving and Playing Operations
12 TFT -LCD television Owner’s Manual
Choose the Menu Language
When you satisfied with your set for the first time,
you must select the language which will be used for
displaying menus and indications.
Press
A
MENU
and
/
to select
Func.
menu.
Press
B
/
button to select the Language option, by
pressing
/
to select the anguage.
When you satisfied with your choice, press
C
MENU
to
return to normal viewing.
Picture
Sound
Tuning
Timer
Input
Func.
Language English
Menu setup
Pic Improve
DSM Off
Blue Screen Off
Calendar
Choose the Input source
If the TV is not in TV mode, press
SOURCE
on the remote
control unit, and signal source menu will be displayed
on the TV screen (as shown in the below figure). Press
/
to select the TV option, and press
or
OK
to confirm the switching to TV input terminal. After
switching, the signal source menu disappears, and at the
upper right corner of screen displays the information of
current signal source.
Pressing this key repeatedly can exit from the signal
source menu.
In case of no other operation, the signal source menu
will automatically disappear upon reaching the OSD
disappearance time preset in the main menu.
TV
AV
S-Video
YPBPR
PC
HDMI
USB
Tuning Menu
In this section, how to use the remote control to set
channel is explained. You can also use buttons on the TV
set to set channel.
Channel Edit
Press
A
MENU
on the remote control unit or
MENU
on
the TV’s front panel to display main menu, and then
press
/
to select
Tuning
menu.
Press
B
/
to select the Channel Edit option, and
then press
OK/
to enter submenu.
Picture
Sound
Tuning
Timer
Input
Func.
Manual Search
Fine Tune
Color System
Sound System
Skip
Channel Edit
Down
54 . 25 MHz
Up
54 . 25 MHz
Auto
DK
Off
Manual Search
Press
/
to select the Manual Search
option, and finally press
/
to start manual
search. Upon finding a program, the search will
automatically stop, and the program will be stored
onto the current channel. You may stop the search
by pressing
OK
or
MENU
.
Fine Tune
Press
/
to select the Fine Tune option, and
then press
/
to start UP or DOWN fine tuning
until obtaining a relatively good picture effect. The
fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a
certain program is not good enough. Normally, the
optimal picture effect can be obtained without fine
tuning when watching TV programs, and fine tuning
is to meet the need of adjusting a certain program.
Color system
Press
/
to select the Color Systems option,
and then press
/
to select correct color
system.
The TV is designed with three systems for your
choice, i.e. Auto, PAL and NTSC. Generally, the
system is set as Auto and it is not necessary to make
