Haier L22A11W, User Manual

Page: 10 / 160

Connection Instructions
You can use your LCD-TV as a monit or for your personal comput er using a VGA
cable (not supplied).
VGA Input
Connection and use steps:
1.Read the user guide supplied wit h
your comput er and ensure that it has
a VGA connect or;
2.Make sure that the power of the LCD
3.Connect a D type 15-pin VGA int erface
cable ( not supplied ) to the VGA video
int erface connect or on the PC. Then
connect the ot her end to the PC video
int erface connect or on the back of the
LCD-TV.Tight en the screws on the VGA
connect ed;
and then turn on the power of the PC;
5.Press the TV/ AV but t on to set the video
input mode of the LCD-TV to PC;
6.Check the image on your TV. There may be noise associat ed wit h the resolut ion,
vert ical pat t ern, cont rast or bright ness in PC mode. If noise is present , change
the PC mode to anot her resolut ion, change the refresh rat e to anot her rat e or
adjust the bright ness and cont rast on the menu unt il the pict ure is clear. If the
refresh rat e of the PC graphic card can not be changed,change the PC graphic
card or consult the manufact urer of the PC graphic card.
VGA IN
Frame frequency (Hz) Line frequency (Khz)
VGA
SVGA
XGA
640*480 31.5KHz 60Hz
800*600 37.9KHz 60Hz
1024*768 48.4KHz 60Hz
Resolut ion
Mode Resolut ion
Not e: All above list ed are subject to VESA Crit eria.
YPbPr Input
How to connect
Connect the DVD video out put s (Y, PB, PR)
t o the COMPONENT(Y, Pb, Pr) IN jacks on
t he TV and connect the DVD audio out put s
t o the AUDIO IN jacks on the TV, as shown
NOTE:
If your DVD player does not have
component video out put ,use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the
TV/AV
but t on on the remot e cont rol to select
7