Haier HXC-1308 Operation Manual Download Page 14

33

Control panel

Light switch

Door handle 

Door lock 

Foot 

Temperature recorder 

Blood storage basket 

(or drawer) 

Shelf 

USB connector

(optional) 

Inner light 

Temperature 

measurement box 

Caster

Door alarm switch 

Air-intake grating 

HXC-158/158B/358/358B/608/608B

The 

refrigerator 

is not 

working 

Fault

Troubleshooting scheme 

Whether the 

refrigeration 

effect is not 

apparent and 

temperature 

exceeds the 

standard 

Whether 

noise level 

is too high 

Alarm light 

flashes and 

buzzer 

alarms 

Examine whether the input power is in accordance with requirements 

Whether the plug and the socket are in poor connection 

Whether the input wire or the controlling wire has fault 

Whether the voltage is too low 

Whether storing too many or too hot articles 

Is there certain space between stored articles 

Is there direct sunlight or other heat radiation 

Whether the door is open frequently 

Whether the ambient temperature is too high 

Whether the air duct is blocked 

Whether the refrigerator is placed steadily 

Whether certain part of the body contacts external objects or the wall 
Noise indicated in the technical data is the mean data tested in the standard 

laboratory without noise, in which the refrigerator without storage of articles is laid on 

the rubber pad and is steadily operated after closing the door to measure out the 

data at 1 meter from the surface, the data do not include the value of startup and 

shutdown of the refrigerator. During the process of usage, it is normal that the actual 

noise is different from the indicated one due to the influences of loaded articles, 

ambient noise, not closing door, startup and shutdown of compressor, etc. 
Whether articles have been put into the refrigerator just now and the temperature is 

not stable at 2 ~ 6°C. It will automatically eliminated after a while of refrigeration. 

Whether the door is not closed well and it is a door opening alarm 

Whether there is an insufficient power supply and it will recover a while after startup. 

Whether the temperature exceeds the standard 

Have questions in the process of usage? Doubt that the refrigerator has fault? 
Read here firstly. This chapter explains to you various faults and phenomena 
that are potential to happen and their solutions. 
Call the Haier after-sale service if the question hasn’t been resolved after 
operation. 
Do not disassemble and repair the refrigerator by yourself. 

FAQ

12

Component Names   Control Panel

Component Names

Summary of Contents for HXC-1308

























Reviews: