manualshive.com logo in svg

Haier HWM80-0566, Service Manual, Page: 11 / 20

Share
Download
Haier HWM80-0566 Service Manual Download Page 11

Dismantle the water inlet hose

Connection between the jointer of the water inlet hose and the water inlet hose

Check the connection between the jointer of the water inlet hose and the water faucet

1.Close the water faucet.
2.Press  the  locking  lever.  Push  down the slider. 
   Then pull off  the water inlet hose. If the machine
   is  used more  than once every week, the jointer 
   of the water inlet hose can be kept on the faucet
   to prevent damaging the fixing screw.

1.Push down the slider. Insert the water inlet 
   hose into the jointer.
2.Hang  the lock lever to the jointer. Release
   the slider till a click sound is heard.

Locking lever

Slider

Slider

Jointer of the
water inlet hose

Locking lever

1.Swing the hose gently to confirm if it is fastened
  stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Each   time   before  use   please  check  if   the 
   connection between the jointer of the water inlet
   hose  and  the water faucet,  and the installation 
   of the water inlet hose are firm, so as to prevent
   dropping from improper installation position.

INSTALLATION AND ACCESSORY PARTS

Model:HWM80-0566

Summary of Contents for HWM80-0566





















Reviews:

No comments