background image

8

The drain hose shall drain smoothly.

Do not trample or press the drain hose.

2.

The height of the drain hose shall be less

than 10cm , or the drainage will not be smooth,

and cost such long time that the machine may

stop at mid way.  

1.

3.

5.

 4.

If the drain hose is too long, cut it at mid

point. To make smooth drainage,cut the front

end of the hose slantingly. 

If the extra hose is too long,cut it either at A or at B point.

    

If extra drain hose is needed,please 

make separate purchase.The inner 

diameter of the extra hose shall not 

less than 30mm, and the  length shall 

not exceed 1.5m.   

 

How to change the direction of the drain hose

Remark: In order to make sure of the correct of installation, it is suggested to change the 

               direction of the drain hose with our company serviceman.

1.Dismantle the back cover of the washing machine.

2.Press the spring lamination lightly and pull the top

   segment of the drain hose decumbent then put 

   down the drain hose from the drain hose frame.

3.Put down the drain hose, squeeze the drain hose

   lightly and take off the hook, put the drain hose into 

   the cabinet. Take off the small baffle which installed

   on the other drain outlet and install it on the side 

   which won't install the drain hose.

4.Extend the drain hose from the other side and install

   it on the base by the drain hose frame

5.Install the back cover. 

 

 

 

  

Back cover

Drain hose frame

Spring lamination

Summary of Contents for HWM60-Z918
















Reviews: