Install the water inlet hose
2. Connect the other ends to the water inlet valve .
1. Attach the water inlet hoses to the water faucet. Using pliers, tighten
the coupling. ( As figure 1)
NOTE
: please check if the connection of the
water inlet pipe is proper
( As figure 2)
Check the connection between the water inlet
hose and the water tap
1.Swaying the hose gently to confirm if it is fastened
stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the water inlet hose and the water tap, is firm,
so as to prevent dropping from improve Installation
position.
5.
After finish washing cycle please pay attention to
turn off the tap.
1.Close the water tap.
2. Pull off the water inlet hose from the water tap and washer
Take down the water inlet hose
Water absorption cushion
Jointer of the water inlet hose
Jointer of the
water inlet valve
Figure 2
Figure 1
the water faucet
the water inlet hose
