Clean the detergent box and set it on the control panel seat.
The method of dismantle and install refer to the
The methods of dismantle and install lint filter
7 Disposal after washing
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may
Influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Install
Dismantle
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (
about 1 hour), then close the top lid.
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
The filter screen of the water inlet valve is l
ikely to be blocked by foreign materials
and influence the water inlet.
Please clean it with brush every two months.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc.
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
4.Hang up the power cord and drain hose.
3.Be sure to pull off the power plug before maintenance.
Detergent box
Filter cover
The back cover
of lint filter
The front cover
of lint filter
install
dismantle
The lint filter must be used during washing.
It must be cleaned in time after each using.
The methods of dismantle and install lint filter as follows:
1.Push down the spring piece of the top lint filter to make the claws out of the filter cover,
and then pull out the lint filter to get it down.
2.Pull the back of the lint filter, and then you can get down it off the front cover of the lint
filter.
3.Sweep the rubbish in the lint filter.
4.Put the back of the lint filter into the front cover .
5.Put the lint filter into filter cover, and make it tight
6.Make sure the lint filter is well installed, or it can influence your use.
