Install the water inlet hose
6
1. Attach the water inlet hoses to the water faucet. Using pliers, tighten
the coupling. ( As figure 1)
NOTE
: Do not over tighten. Damage to the valves can result.
2. Connect the other ends to the water inlet valve .
( As figure 2)
Figure 1
Water absorption cushion
Jointer of the water inlet hose
Jointer of the
water inlet valve
Figure 2
1.Swaying the hose gently to confirm if it is fastened
stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the water inlet hose and the water tap is firm,
so as to prevent dropping from improve Installation
position.
1.After using, Close the water tap.
2. Pull off the water inlet hose from the water tap and washer
Take down the water inlet hose
Check the connection between the jointer of
the water inlet hose and the water tap
