11
If Washer does not operate:
Check the unit is plugged in. The plug may have come loose.
Check if the electrical wall receptacle is of proper voltage.
Check if the circuit breaker needs to be reset or if the fuse needs
replacing.
Check if the washer is overloaded :load may need to be
re-arranged or redistributed evenly.
Check if the lid is open. You may have to close the lid properly.
The washer pauses in some cycles. This is normal in delicate or
hand-wash cycles which has short period of time. You will not hear
washer operation for a short period of time. When the soak time is
over, it will start automatically.
Problems with water:
Not enough water coming out: Water faucet may need to be
turned on fully . Hoses may be tangled or creased. Straighten
out hoses. Check water level selection, it may need to be
readjusted.
Water temperature is incorrect: Check your water heater
temperature. Hot water needs to be at a temperature of at least
120 F-140 F(49 C-60 C).Check to make sure the inlet hoses are
properly connected (E.g. Hot to hot & cold to cold).
Water leaks: This may be due to incorrectiy installed drain hose or
fill hoses. Your home drain may be clogged . You may need to
tighten hoses, check the plumbing or call a plumber for assistance.
Water will not drain: This may be due to not installing your drain
hose correctly. Check the position of the drain hose. In order to
drain properly, make sure that top of drain outlet is less than 5 ft.
(1.5 m) above the floor.
Washer is making noise:
Washer may need to be reinstalled (Check washer installation
section).
TROUBLE SHOOTING