Haier HWM130-0677 Use & Care Manual Download Page 11

Cleaning and Maintenance 

Moving & Vacationing

  Use only a damp or sudsy cloth for cleaning the control panel.
 
  To avoid any kind of damage to cabinet finish, wipe washer 
  cabinet as needed. If you spill liquid/powdered softener bleach 
  or detergent on the cabinet, wipe cabinet immediately . 
  
  Do not use any abrasive, harsh chemicals, ammonia, chlorine 
  bleach, concentrated detergent, solvents or metal scouring 
  pads. These chemicals may dissolve, damage and/or 
  discolor your washer. 
  
  Remove pins or other sharp objects from clothes to prevent 
  damage to interior parts. 
  
  Leave lid open after washing to allow inside of washer to dry
  and assist in preventing unwelcomed bad odours.

 

Warning:

 Always unplug your washer to avoid electric shock 

                before cleaning. Ignoring this warning may result in 
                injury. Before using cleaning products, always read and 
                follow manufacturer warnings to avoid  personal Injury 
                or product damage. 

10

CARE AND CLEANING GUIDE

  Turn off water supply at the faucet and disconnect hoses. Drain 
  water from all hoses.
  
  Disconnect electrical plug.
  
  Dry inner wash tub. If moving washer disconnect drain hose. 
  
  Turn the leveling legs clockwise all the way in.
  
  Move and store your washer in upright position only
  
  To prevent mold or mildew, leave lid open so moisture inside 
  machine can evaporate. 

Insert transport bolt/arm if relocating washer. Ensure removal 
prior to usuage.

Summary of Contents for HWM130-0677





















Reviews: