Haier HWM100-828A User Manual Download Page 5

3

Safety precautions

Do not put hand into the rotating tub. It is dangerous 
even if the rotation speed is slow.  Take special care of 
the  children.  Keep  children  away  from  the  washing 
machine  to avoid them climbing on.

    Do not decompose, repair or alter the machine by
     yourself.

   Do not put any hot or  heavy items (such as the 
   kettle with hot water) on the washing machine.

 Do not wash laundries with volatile materials 
 (such as thinner, petrol etc.).

 Keep the machine away from direct sunlight and
 heat source like the heater.

 Please  keep the lint filter in good  condition, 
and install it  to proper position  during 
washing.  If  the lint filter is lost or
damaged, please contact the customer
care agent of our company.

.

To  protect  your  laundries  and washing  machine, 
please take out all of the coins, buttons, sand, hairpin
and other foreign materials before washing.

   Please check if the water faucet is open, and if the connection of the water inlet pipe is proper.
   It is suggested to use foamless washing powder.

Benzene

Petrol

The handicapped or children without care shall not use
 the machine.

Install

Dismantle

Please don t use the washer in the environment below 0 C; if the washer has been stored below 0 C, 
please be sure to ensure the washer is placed under the room temperature for 24 hours and then use 
otherwise the washing effects may be lowered or the washer may be damaged.  

To change the direction of drain pipe, please contact the  customer care agent of our company.           

6.Fabrics that have damage when soaked in water.

Figure 1

Upon completion of washing, iron the laundry with a steam iron. 

Hold the steam iron above 
the laundry and do not touch
 the laundry. Reshape the
 laundry. (As illustrated
 in Fig 1)

Figure 2

Pin

When shrinkage occurs
Stretch the laundry to its original
 size and locate it with pins. Use
 a steam iron to dry the laundry 
completely. Do not touch the 
laundry. (As illustrated in Fig 2)

Even there's no water in the tub, a certain period is required before spin starting.
Separate the laundries that are not colorfast from other laundries in washing.

     

The soak  procedure can work in cooperation with automatic  programs like MEMORY,BLANKET, STANDARD, CHILD,

     COMMON.  There is intermittent pulsator stirring during soak.
     After  the  machine starts  operation,  you can only set the program and procedure during washing and  soaking, 
     During rinsing 

you can only set the spinning time.  and can not make setting in other cases.

3 Push "SOAK" "WASH" "RINSE" "SPIN" button to select suitable procedure program

During  speedy and tub dry programs.  push the  wash ,rinse

spin  button the machine have no reaction.

4 Push the " WATER LEVEL "button, select   suitable water level

For program, the washing machine will execute fuzzy program automatically to detect the cloth.
After defection, it can set the water level automatically.  To select other water level,  first push the  "START/PAUSE" 
button,  then push the  "WATER LEVEL"  button to set the water level.

5  Push the "DELAY" button to select suitable reserve wash   program

P12

"

 

"

After switching on the power, the reserve program is set to off mode automatically. If you need to 
set the washing procedure to be finished at reserved time, please push the  DELAY   button to 
set the reserve wash program. Refer to reserve button in Page 12 for selection.

When the "DELAY" function is activated, the indicator light of the program you 
have set will be off. The "reserve (hour)" and "time remain" indicator lights will 
be on. During reserve procedure, push the "DELAY" button to display the reserve mode.
To change the running program or cancel the reserve setting, you 
need to switch off the power and make new selection.

6 Push the "START/PAUSE" button 

6 Finish washing

After finishing wash 

it'll alarm and switch off power automatically

13

14

The washing machine has a Wool  program , intended for high-grade fabrics such as cashmere . First, make sure the laundry 
can be washed with water or not. If not, do not use the washing machine to wash the laundry. If yes, select the washing cycle
 recommended by the fabric man ufacturer. The Woollen program can be used to wash fine clothes such as cashmere sweater, 
linen blouse,woolen pants;  For clothes with local stains, such as sticky stains at collar or cuff, lay the clothes upon a towel and 
spread neutral detergent (for washing machine) on the stains. Use a soft brush to pat at the clothes gently before putting the 
clothes into the machine.Do not rub the clothes hard. 

Before washing, please fold up the laundry as needed, then put the laundry into the inner tub, flat and neat. 

These fabrics are not washable: 

1. Fabrics that deform when soaked in water;
2.Fabrics that shrink, discolor or go through other exterior changes when soaked in water; 

3.Fabrics that lose original texture when soaked in water; 
4.Fabrics that discolor when soaked in water; 

5.Fabrics that have pilling or pressed pile when soaked in water;  

Summary of Contents for HWM100-828A











Reviews: