background image

15

14

'DLO\XVH

Daily use

 

This appliance is only for domestic use inside the house. If it is used for 
commercial, industrial or not intended purposes any Haier guarantee will not 
be valid anymore. Consider instructions on each garment label and wash only 
machine-washable laundr y.

3RZHUVXSSO\

Connect the washing machine  to the power supply 
(220V to 240V/50Hz).

:DWHUFRQQHFWLRQ

Turn on the tap. The water must be clean and clear.

Warning! 

Before use, check for leakage in the joints between the tap and the inlet hose 
by turning on the tap.

Preparing laundry

Separate white clothes from coloured ones. Wash 
coloured textiles first by hand to check if they fade 
or run.

Empty pockets (keys, coins, etc.) and remove 
harder decorative objects (e.g. brooches).

Garments without hems, delicates and finely woven 
textile such as f ine  curtains  are  to be put into a 
wash bag (hand or dry cleaning  would be better).

Close zippers and hooks, make sure the buttons are 
sewn on tightly and place small items such as socks, 
belts, bras, etc. in a wash bag.

Unfold large pieces of fabric such as bed sheets,
bedspreads etc.

Warning!

Non-textile, as  

well as small, loose or sharp-edged items may cause malfunctions 

and damage of clothes and appliance.

Open the door and put in the laundry piece by piece. Close the door carefully. 
Don‘t overload. Check if  you can put a hand upright on  top of load. 

/RDGLQJWKHDSSOLDQFH

General information and tips:

After installation or long down time ,run programme “Drum Clean“  with no 
load and add detergent in washing agent compartment to remove possibly 
corruptive residues.

6HOHFWLQJGHWHUJHQW

General information and tips:

Remove detergent residues before next wash cycle. Please follow given 
detergent dosage recommendation. 

Slide out the detergent drawer and put the required 
chemicals into corresponding compartments. Push 
back the drawer gently.

Adding detergent

To get the best washing results, select the program 
that is most suitable to the laundry type loaded. 
Select program by turning the program selector dial.

Select a programme

Sort out clothes according to fabric (cotton, synthe- 
tics, wool or silk) and to how dirty they are. Pay 
attention to the care labelling of washing labels.

Turn jeans and printed, decorated or color-intensive 
textiles inside out; If possible, wash them separately.

Washing efficiency and performance will vary de- 
pending on detergent quality. Use only machine wash 
approved detergent and if needed specific deter- 
gents, e.g. for synthetic and woolen fabric. Be mindful 
of always detergent manufacturer recommendations.

Summary of Contents for HWF12D1W1














Reviews: