Haier HWF10DW1 User Manual Download Page 8

15

14

Daily use

Daily use

This  appliance  is  only  for  domestic  use  inside  the  house.  If  it  is  used  for 
commercial, industrial or not intended purposes any Haier guarantee will not 
be valid anymore. Consider instructions on each garment label and wash only 
machine-washable laundr y.

Power supply

Connect the washing machine to the power supply 
(220V to 240V/50Hz).

Water connection

Turn on the tap. The water must be clean and clea r.

Warning! 

Before use, check for leakage in the joints between the tap and the inlet hose 
by turning on the tap.

Open the door and put in the washing machine  piece by piece. Close the door

 

carefully. 

Don‘t overload. Check if  you can put a hand upright on  top of load. 

Loading the appliance

General information and tips:

After  installation  or  long  down  time ,  run  programme  “Drum  Clean“  with  no 
load  and  add  detergent  in  washing  agent  compartment  to  remove  possibly 
corruptive residues.

General information and tips:

Remove  detergent  residues  before  next  wash  cycle.  Please  follow  given 
detergent  dosage  recommendation. 

 

Slide out the detergent drawer and put the required 
chemicals  into  corresponding  compartments.  Push 
back the drawer gently.

Adding detergent

To  get  the  best  washing  results,  select  the  program 
that  is  most  suitable  to  the  laundry  type  loaded. 
Select program by turning the program selector dial.

Select a programme

Selecting detergent

Washing  efficiency  and  performance  will  vary  de- 
pending on detergent quality. Use only machine wash 
approved  detergent  and  if  needed  specific  deter- 
gents, e.g. for synthetic and woolen fabric. Be mindful 
of always detergent manufacturer recommendations.

 

Preparing laundry

Separate  white  clothes  from  coloured  ones.  Wash 
coloured textiles first by hand to check if they fade 
or run.

Empty  pockets  (keys,  coins,  etc.)  and  remove 
harder decorative objects (e.g. brooches).

Garments without hems, delicates and finely woven 
textile  such  as  f  ine  curtains  are  to  be  put  into  a 
wash bag (hand or dry cleaning  would be better).

Close zippers and hooks, make sure the buttons are 
sewn on tightly and place small items such as socks, 
belts, bras, etc. in a wash bag.

Unfold large pieces of fabric such as bed sheets,
bedspreads etc.

Sort out clothes according to fabric (cotton, synthe- 
tics,  wool  or  silk)  and  to  how  dirty  they  are.  Pay 
attention to the care labelling of washing labels.

Turn jeans and printed, decorated or color-intensive 
textiles inside out; If possible, wash them separately.

Warning!

Non-textile, as  

well as small, loose or sharp-edged items may cause malfunctions 

and damage of clothes and appliance.

Summary of Contents for HWF10DW1














Reviews: