Haier HWF10DW1 User Manual Download Page 10

18

19

Care and cleaning

Care and cleaning

Cleaning the detergent drawer

Clean  the  drawer  from  detergent  residues   regularly. 
Pull  out  the  drawer  until  it  stops  (1)  and  press  the 
release button (2) to remove the drawer. Then flush the 
drawer with water until  it  is clean  and  insert  the 
drawer back in the appliance.

Cleaning the machine

Unplug the machine during cleaning and maintenance. Use a soft cloth with 
soap  liquid  to  clean  the  machine  case  and  rubber  components.  Do  not  use 
organic chemicals or corrosive solvents.

Cleaning the drum

Remove  accidentally   washed  metal  parts,  such  as  pins,  coins,  etc.  from  the 
drum because they cause rust stains and damage. Use a non-chloride cleaner 
for  removing  rust  stains.  Observe  the  warning  hints  of  the  cleaning  agent 
manufacturer. Do not use any hard objects or steel wool for cleaning.

Cleaning the machine

If the appliance is left idle  for a long period:

1. Pull out the power plug.
2. Turn off water supply.
3. Open the door  to prevent formation of moisture and 
    odours. Let door open while not used.
4. To prevent drying out, do not le ave the dispenser 
    lids open for a long period of time.
5. Empty, clean and dry the detergent drawer.

Before next usage check carefully power  cord, water
inlet and drain hose. Make sure everything is properly
installed and no leakage.

.

Pump filter

Clean the fil ter once a month and check the pump filter 
immediately if the appliance:

     doesn´t drain the water.

General information and tips:

Pump filter sealing has  to be clean and unhurt. If the lid is 
not full tightened, water will escape . The filter must be in 
place, or it may lead to leakage.

Warning!

Scalding  Risk!  Water  in  the  pump  filter  can  be  very 
hot!Before and action please ensure water has cooled down.

1. Turn off and unplug the machine.

2. Open service flap  at the right corner of appliance front.

3. Provide a flat container to catch leach water. There could 
    be bigg amounts!

4. Pull the drain hose out and hold its end above the 
    container .

5. Take the sealing plug out of the drain hose.

6. After complete drainage close d rainhose and push it 
    back into the machine.

7. Unscrew and remove counter clockwise the pump.

8. Remove contaminants and dirt.

9. Clean pump fil ter carefully.

10. Refix it thoroughly.

11. Close service flap.

Summary of Contents for HWF10DW1














Reviews: