Haier HWE18VCN, User & Care Manual

Page: 15 / 100

PREPARING THE AIR CONDITIONER cont.:
HWE15XCN/HWE18VCN
1. Measure the width of the window opening. (See Fig.9)
2. k r a M the center line on the inside of the windowsill with a pencil.
(See Fig.10)
ENGLISH
HOW TO INSTALL PAGE 13
INSTALL THE CABINET IN THE WINDOW
(See Fig.11)
FOR MODELS: HWE15XCN HWE18VCN
1. Center the cabinet in the windowsill. Make sure to place the cabinet so that it is resting on the
windowsill with a ¼" to ½" downward tilt towards the outside (See Fig. 11) . Lower the window
sash behind the fr ont flange of the top channel to hold the unit in place. The bottom channel
must rest behind the window sill.
NOTE: The appearance of your model ma y diff er from the one shown.
NOTES AND WARNINGS:
• Be su re your air conditioner does not fall out of the opening during installation or removal.
• A grounded electrical outlet must be within 4 ft. (122 cm) of where the power supply cord
exits the air conditioner.
• Do n ot block the air discharge or air intake areas on the front panel.
• Do n ot block the louvers on the outside of the air conditioner.
WIDTH
LENGTH
HEIGHT
WIDTH
WIDTH
CENTER
WIDTH OF
WIND OW OPENING
CENTER LINE
Fig. 9
Fig. 10
Fig. 11
Bottom Channel
Window Sill