Haier HWD80-BP14636, User Manual, Page: 14 / 64

3- Control panel
GB
14
3.8 Child lock
Press button “Temp.“ and ”Intense” for 3 seconds si-
multaneously (Fig. 3-8.1) to block all panel elements
against activation. For unlocking please press again
the two buttons.
The display shows
cLo
I-
(Fig. 3-8.2) if a button will be
pressed, when the child lock is activated. The change
is not running.
Temp . Speed Intense Zeitvorwahl Start/Pause 5+5 kg
Speed up
3-8.1
3-8.2
3.7- ”Start/Pause“ button
Press this button (Fig. 3-7) gently to start or inter-
rupt the currently displayed programme. During pro-
gramme setting and during programme run the LED
above the button is shining, or if interrupted blinking. .
Start/Pause
3-7
3.6- “Delay” button
Press this button (Fig. 3-6) to start the programme
with a delay. End time delay could be increased in steps
of 30 minutes from 0.5-24h. For example display off
6 : 30 means end of programme cycle will be in 6 hours
and 30 minutes. Press “Start/Pause” button to activate
the time delay. It is not applicable to programme SPIN. Temp
. Speed Intense Delay Start/Pause
5+5 kg
Speed up
3-6
Note: Liquid detergent
If using liquid detergent, it is not recommended to activate the end time delay.