6
4. Disassembly of Packaging and Trans-
porting Parts and Adjustment of Feet
Disassembly of Packaging and Transporting Parts
Packaging rods, packaging bolts and accessories are
used for fixing the internal components of the washing
machine during the transportation, and shall be
completely disassembled before use.
Firstly, the two packaging rods are dismounted and
then the three packaging bolts are disassembled, and
the positions thereof are shown in the Figure 1.
The specific operation is as follows:
Packaging boltsPackaging
cushions
Packaging
sleeves
Packaging
bolts
Packaging rods
Covers of
packaging
bolt holes
Packaging rods
Figure 1
Figure 4
Figure 3
Figure 2
Locking direction
Lock nut
Feet
Please properly keep the disassembled packaging
and transporting parts for future use in case of
moving and machine transportation.
Please ensure that the packaging and transportation
parts are assembled prior to machine transportation.
When the washing machine is even, the noise and
the vibration are reduced, thus please ensure that the
washing machine is adjusted evenly before use.
①
please loosen the lock nut through a wrench
among those accessories.
②
Adjust the level of the washing machine by
adjusting the heights of the feet.
③
After the feet are evenly adjusted, the lock nut is
screwed along the locking direction through the
wrench.
Firstly the two packaging rods are disassembled from
the washing machine through a screw wrench or a
No. 18 wrench, and then packaging cushions are
taken out. The arrow in the Figure 2 shows the
disassembly direction.
Next the three packaging bolts are disassembled
from the washing machine through the screw wrench
or a No. 13 wrench, and then packaging sleeves are
taken out. The arrow in the Figure 3 shows the
disassembly direction.
The covers of the packaging bolt holes are clamped
into those holes left after the packaging rods and the
packaging bolts are disassembled, shown as the
Figure 4.
Adjustment of Feet