Drying
The washing machine is provided with the function of drying ramie cotton clothes, chemical fiber clothes and
the like, can automatically judge the dry and wet degree of clothes and timely end the drying procedure. The
function is available under the mode of accurate washing and has the following 4 modes to be selected:
Strong drying: suitable for dying ramie cotton clothes and the like.
Weak drying: suitable for drying chemical fiber and other easily damaged clothes.
Ironing
：
dried clothes can be directly ironed by an iron after being taken out.
Timing: users can set the drying time on their owns as needed, with the selective time range of 30 minutes, 60
minutes, 90 minutes and 120 minutes. The four modes can be selected by pressing the “ ” key.
In drying, please notice:
Whether clothes can be dried, which depends on its material. Before drying, please ensure that clothes are
suitable for washing machine drying.
Before drying, please ensure that the faucet has been opened and it must have cold water.
Dehydrated clothes shall be firstly taken out from the roller and unfolded in a shaking manner, and then are
put into the roller for independent drying.
If excessive clothes to be dried are put at one time, not only the drying effect is not good, but also the clothes
are easy to crease, and the real drying time may be longer than the setting time.
The time of drying fewer clothes or thin clothes may be less than the setting time.
When the weak drying procedure is selected, it is normal that the running time is longer.
In order to reduce the temperature in the roller and prevent scald, cooling and temperature reduction shall be
conducted in the roller before the washing machine finishes drying operation. It is normal that tine displayed
on the display screen remains unchanged for a certain time.
Eccentric Protection
During dehydration, if clothes are not equally distributed, the washing machine can re-scatter and re-distribute
the clothes, and the dehydration begins after the clothes are equally distributed; if the clothes are still not
equally distributed within the setting time, the washing machine will not conduct dehydration in an attempt to
avoid violent vibration of the washing machine, and the icon of is displayed for the alarm. In this case,
the user shall check whether clothes are wound and tied and re-settle the clothes, and then re-select the “
” procedure for the dehydration. If clothes are fewer, the washing machine may not conduct
dehydration due to eccentric protection, thus some clothes can be added and are equally distributed to ensure
the hydration. In addition, it is normal that the washing machine takes longer time to re-distribute and
re-scatter clothes.
Cancel or Re-select Procedure during the Operation
If the children lock function is started, the following operation can be carried out after the children lock is
unlocked.
If the operation modes (washing mode, washing/drying mode and drying mode) or washing procedures
(ramie cotton, chemical fiber, etc) are required to be reset, press the “ ” key for 2 seconds to shut down
the machine, and then re-press the “Power” key to start the machine, in this way, the needed operation modes
and washing procedures can be reset.
Under accurate washing mode, if only the washing parameters are needed to be reset, slightly press the
“ ” key to reset the washing parameters (including washing time, poaching times, dehydration time,
dehydration rotation speed, but resettable parameters are required to be selected according to the real
running process of the procedure) as needed, , and then re-press the “Start/Pause” key to start the procedure.
Power-off Memory Function
The washing machine is provided with the function of power-off memory. If the power is accidently off or the
plug is loosened during the washing process, the washing machine can memorize the procedure running
status and can continue working according to original procedure after the power is on and the “ ” key is
pressed for the starting.
19