Haier HWD120-B1558, User Manual

Page: 30 / 44

8- Care and cleaning
GB
30
1. Start spinning programme and drain out the water.
2.
and unplug the appliance (Fig. 8.5-2).
3. Open service fl
screwdriver (Fig. 8.5-3).
4. Provide a fl at container (1) to catch leach water
(Fig. 8.5-4). There could be bigger amounts!
5. Pull the drainhose (2) out and hold its end above
the container.
6. Take the sealing plug (3) out of the drainhose.
8.5-2
8.5-3
8.5-4
8.4 Long periods of disuse
If the appliance is left idle for a longer period:
1. Pull out the electrical plug (Fig. 8.4-1).
2.
3. Open the doors to prevent formation of moisture
and odours. Leave doors open while not in use.
Before next usage carefully check the power cord, wa-
ter inlet and drain hose. Make sure everything is prop-
erly installed and does not leak.
8.4-1 8.4-2
Note: Tub Clean
After long periods of disuse we recommend to run the “Tub Clean” programme without
a load and a small amount of detergent or a special machine cleaner to remove possibly
corruptive residues.
-
the appliance:
doesn´t drain the water.
doesn´t spin.
makes unusual noises while running.
A
WARNING!
hot! Before any action please ensure water has
cooled down.
8.5-1
8
8
8