Haier HW80-B14876, User Manual, Page: 27 / 32

9-Installation
27
9.5 Adjusting the
●
feet
Install the appliance on solid ground. Adjust all feet
(Fig.
●
9-9) to achieve a complete level position. This
will minimize vibrations and thus noise during use. It
will also reduce wear and tear. We recommend to use
a
●
spirit level for adjustment. Floor should be as stable
at as possible.
9.4 Moving the appliance
If the machine is to be moved to a distant location, replace the t ransport protection befor
installation to prevent damage. The assemply takes place in reserve order.
Note: Keep in safe place
Keep all parts of the transport protection in a safe place for later use. Whenever the
3. Pull out the 2 iron bars I1 and I2 (Fig. 9-7).
4. Fill the 6 left holes with blanking plugs
R1-R4
9-6
I1 I2
9-7
9-8
appliance is to be moved at first reinstall the protection parts.
R5-R10
2. Remove 10screws (R1-R10) from back reinforcement
(Fig. 9-6) and put aside and the 8kg model has only
one rearward reinforcement below.