Haier HW120-B14876, User Manual

Page: 23 / 72

EN
9-Troubleshooting
23
of a problem please check all shown possibilities and follow below instructions before you
WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
improper repairs can cause considerable consequential damages.
A damaged power cable should only be replaced by the manufacturer, its service
9.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
1:25
The remaining wash cycle time will be 1 hour and 25 minutes.
6:30
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 minutes.
AUtO
Automatic load detection is working; only in some programs.
End
Lock-
Door is closed because of high water level, high water temperature or spinning cycle
.
bEEP OFF
The buzzer is deactivated.
bEEP On
The buzzer is activated.
9.2 Troubleshooting with display code
n o it u l o S e s u a C m e l b o r P
E1
within 6 minutes.
E2
E4
pressure is normal.
E8
The function keys is closed.The programme changing is invalid.
ustomer Service.
Fb
Open drain pump to drain
Shut down the machine Water pressure switch continuously leaks
for 10 seconds-error