11.8 Electrical Connection
Before each connection check if:
▶
power supply, socket and fusing are appropriate to
the rating plate.
▶
the power socket is earthed and no multi-plug or
extension are used.
▶
the power plug and socket are strictly according.
▶
Only UK:
The UK plug meets BS1363A standard.
Put the plug into the socket (Fig. 11-14).
WARNING!
▶
dry and leack free!
▶
Take care these parts are never to be crushed, kinked, or twisted.
▶
If the supply cord is damaged, it must be replaced by the service agent (see warranty
card) in order to avoid a hazard.
11-14
11.7 Fresh Water Connection
Make sure that the gaskets are inserted.
1. Connect the water inlet hose with the angled
end to the appliance (Fig. 11-12). Tighten the
screw joint by hand.
2. The other end connect to a water tap with a
3/4 thread (Fig. 11-13).
11-12
11-Installation
EN
11-13
2
3
