Haier HW100-B1439, User Manual

Page: 16 / 65

6-Daily use
EN
16
6.7 Switch on the appliance
Press the „on/off“- button to switch on the appliance
(Fig. 6-5). The LED of the „Start/Pause“ button is
flashing.
6.6 Adding detergent
1. Slide out the detergent drawer.
2. Put the required chemicals into corresponding
compartments (Fig. 6-4)
3. Push back the drawer gently.
Note:
▶
Remove detergent residues before next wash cycle from the detergent drawer.
▶
Do not overuse detergent or softener.
▶
Please follow the instruction on the detergent package.
▶
Always fill the detergent just before the beginning of the wash cycle.
▶
Concentrated liquid detergent should be diluted before adding into compartment 2.
▶
The best use of liquid detergent is by using a dosing ball, which is given with the laun-
dry into the washing machine.
▶
Do not use liquid detergent if „Delay“ is selected.
▶
Carefully choose the programme settings according to the care symbols on all laun-
dry labels and according to the programme table.
6.8 Select a programme
To get the best washing results, select a programme
which fits the degree of soiling and sort of laundry
type.
Turn the programme knob (Fig. 6-6) to select the
right programme. Related programme LED lights up
and the default settings are displayed.
6.9 Add individual selections
Select required options and settings (Fig. 6-7); refer to
CONTROL PANEL.
6-4
6-5 6-6
Note: Odour removal
Before first use we recommended to run programme HYGIENIC with no load and small
amount of detergent in washing agent compartment (2) or special machine cleaner to
remove possibly corruptive residues.
6-7