Haier HW-F1081 ME, User Manual, Page: 8 / 20

08
BEFORE USE
Εντατικό
πλύσιμο
Γρήγορο
πρόγραμμα
Στύψιμο
Θερμοκρασία
Καθυστέρηση
έναρξης
Επιπλέον
ξέβγαλμα
High wash
Εύκολο
σιδέρωμα
Πρόπλυση
Βαμβακερά
Συνθετικά
Μάλλινα
Ανάμεικτα
Jeans
Αθλητικά
Πλύσιμο
στο χέρι
Ξέβγαλμα
Στύψιμο
Άντληση
ΟΝ / OFF
Comfort 40
Κλείδωμα
M A C
J E K
F H L G D B I
A Program knob
B Temperature button
C Speed button
D Start/pause button
E Intense button
F Rinse hold button
G Extra rinse button
H High wash
I Delay button
J Display
K Detergent distribution drawer
L Speed-up button
M Power button
OPERATIONAL FUNCTIONS
A ¬ Program knob _Select program by turning the knob (See "program modes" on page 8).
B ¬ Temperature
button _ Select the desired washing temperature (--,30,40,50, 60,90°C ) by pressing and holding down this
button. When selected, the temperature is shown on the display. Cold wash is selected when the symbol "--"
is displayed.
C ¬ Speed button _ Select the desired spin speed (0, 400, 600, 800, 1000, 1200, 1400 rpm) by pressing and holding
down this button. When selected, the speed value is shown on the display. The washing machine does not
spin when "0" is displayed. The washing machine spins at 1200 rpm when "1200" is displayed.
D ¬ Start/pause
button _ If you press this button, ":" will be displayed and operation will start. If you press this button during a
wash cycle, the ":" sign will start blinking and operation will pause. Press it again to resume operation.
Note: After operation is suspended, the washing temperature, spinning speed and other functions can not be
reset.
_ Press this button for 2 seconds to unlock the door if the status allows the door to open (water level lower
than porthole, water temperature lower than 50°C, stopped motor).
E ¬ Intense button _ If the laundry is heavily soiled, press this button before starting the program. When the button is pressed,
the washing time increases.
F ¬ Rinse hold button _ If you press this button, the washing machine will not drain the water after the last rinsing operation,
but start a soaking cycle. The indicator light goes on. To spin the laundry, press this button again. The
indicator light turns off and the program continues to the end. Note: Press only when "Prewash", "Cotton",
"Synthetics" or "Rinse" is selected.
CONTROL PANEL