Haier HW-F1081 ME User Manual Download Page 16

16

1.

2.

1.

2.

1.

3.

5.

2.

4.

6.

MAINTENANCE

CLEANING & CARE

AFTER WASHING

Turn off the water supply and pull out electricity plug after each wash. 
Open the washer door to prevent formation of moisture and odours. 
If the washing machine is left idle for a long period, drain the water 
in the machine and replace the drain hose.

CLEANING THE DETERGENT DRAWER

Clean the detergent distribution drawer regularly.
Swing out the drawer, fl ush it clean with water and then replace it.

CLEANING THE MACHINE

Unplug the machine during cleaning and maintenance. Use a soft 
cloth dampened with soap liquid to clean the machine case and 
rubber components. Do not use organic chemicals or corrosive 
solvents.

CLEANING THE FILTER

Clean the fi lter once a month:

Pull out the bottom cover with thin objects or tools carefully.

1. 

Pull the drain hose out of the sewage set in the bottom 

2. 

panel. 

Hold the drain hose into a water container, take out the 

3. 

plastic plug and let the excess water fl ow into the container. 

Reinstall the plug and push the hose back.

Remove the fi lter by turning counterclockwise. 

4. 

Flush the fi lter clean with running water.

5. 

Replace the fi lter by turning clockwise and remount the 

6. 
cover.

Caution:
The fi lter must be in place, or it may lead to leakage.

Summary of Contents for HW-F1081 ME





















Reviews: