Front Load Washing Machine
Model:HVS SERIES
Page 9
ƽ
5HPRYHDOOWKHSDFNLQJPDWHULDOVLQFOXGLQJWKHIRDPEDVH
WRSUHYHQWYLEUDWLRQGXULQJXVHDVVKRZQLQ)LJ
8SRQRSHQLQJRIWKHSDFNDJHZDWHUGURSVPD\EHVHHQRQWKH
SODVWLFEDJDQGWKHSRUWKROH7KLVLVQRUPDOSKHQRPHQRQ
UHVXOWLQJIURPZDWHUWHVWLQWKHIDFWRU\
Fig
.1
ƽ
Check attachments and materials with reference to the following
ƽ
Dismantle the packing bolts as shown in Fig. 2.
The packing bolts are designed for clamping anti-vibration components
inside of the washing machine during the transportation process.
Beforeuse:
1. Remove the back plate;
2. Remove the three packing bolts on the back plate and take out the
rubber hose;
3. Replace the back plate;
4. Fill the holes left by the packing bolts with plastic plugs.
(Attention: The packing bolts and rubber hose should be kept in a safe
place for later use)
Fig
ƽ
Adjusting the washing machine
There are adjustable feet under the bottom of the washing machine.
Before use, the washing machine should be adjusted, as shown in
Fig. 3, so that it is level.
Fig.
4XW\
1DPH
2SHUDWLRQ
PDQXDO
4XDOLW\
FHUWLILFDWH
:DWHU
KRVH
'UDLQDJH
KROGHU
3ODVWLF
SOXJV
Installation
