press MENU button (for some line) and then VOL+ or VOL- for option of desired line. Finally
press MENU button.
(
3
)
Some item can be deleted by following the same process above.
4
.
Press RATING button again to quit V-CHIP menu.
MPAA RATING
1
.
Press RATING button, and the RATING main menu will appear on the screen.
2
.
When MPAA RATING turns bright red, press MENU button and MPAA RATING submenu will appear on the
screen.
3
.
If all items are to be selected, press CH+ or CH- button to move the icon to the top left corner, and then press
MENU button.
4
.
If all selective items are to be deleted, press CH+ or CH- button to move the icon to the bottom left corner,
and then press MENU button twice.
5. Items under or above the designated icon in the submenu can be selected.
6. Press RATING button again to quit V-CHIP menu.
BLOCK OFF
1
.
Press RATING button, and the RATING main menu will appear on the screen.
2
.
When BLOCK turns bright red and MENU button is pressed, BLOCK will display BLOCK OFF and BLOCK
ON.
Caution:
BLOCK OFF: Indicating lock on status. Regardless setup of TV RATING and MPAA RATING, even V-CHIP signals
are received during TV programs, this TV set dos not have the V-CHIP function.
BLOCK ON: Indicating lock off status. When TV RATING and MPAA RATING are selected, the TV set will have
the V-CHIP function when V-CHIP signals are received in the TV program.
Precausions:
1. Keep the TV set away from heat resources, such as stoves and radiators;
2. Place the TV set in a well ventilated area;
3. Place the TV set in an area free from dusts and corrosive gas;
4. Prevent the TV set from waterdrops, moisture and humidity;
5. Do not place magnetic materials on the TV set;
6. Disconnect the TV set when moving the TV set.
7. When the TV set is turn on during a rainy weather, disconnect the outdoor antenna and use the indoor antenna
attached to the TV set.
8. Disconnect the TV set from power supply source during a power interruption or vacation.
Program Diagram
Summary of Contents for HTVF20R72
Page 11: ......
Page 26: ...PCB Diagram 3 PCB Diagram ...