5
Precautions for Use
• For product with batteries, disconnect the switch of battery connecting lines if the product will be
out of service for long time. Reconnect the battery switch when it is put into operation again.
• Make sure the temperature inside the product has reached the set value and then put into the
articles.
• The temperature display value of product refers to the temperature value at the temperature
sensing probe inside the product. Though the temperature displayed is different from the actual
one at the center of product, it will approach to the real temperature gradually.
• Clean the product with neutral detergent diluted. Brushes, acids, gasoline, soap powders,
polishing powders or hot water are prohibited to clean product as these materials may damage the
painting surface and plastic & rubber components and parts. Never wipe the plastic & rubber
components and parts with volatile solvent such as gasoline.
• Shut off the power as well as the battery switch if the product will be out-of-service for a long time
.
• Reduce the time of keeping door open when storing or taking food each time, to prevent great
fluctuation to the temperature and humidity inside the product.
• The product will see a sharp temperature increase in a short time when the door is opened, which
is normal, and the temperature will resume 1h after the door is closed.
• The product shall operate at an ambient temperature b5°C and +43°C and the
temperature of vaccine storage area will 2 to +8°C if the ambient temperature is below
or above defined one.
• Do not place articles at the bottom of inner container or around the shelf as the product
temperature will be ununiform if the air duct is blocked.
• The display temperature and humidity may be a little different from the actual ones due to
refrigeration inertia, which is normal.
• The USB 2.0 jack can only be used to charge devices that meet the above parameters; please
try to use it under conditions where there's sufficient sunlight.
