9
9.Fill Water in Water Tank (Applicable for HTCD-160)
Put the container fully filled with purified water on the top of the product or at a higher position.
Then, put the antiseptic substance in the container.
Insert the long end of the water absorber in the water container. Unscrew the water plug. After
water starts flowing, it is unnecessary to squeeze the air bag and water can flow into the water
tank automatically.
After a certain volume of water is filled, check the liquid level. When it reaches the middle of the
maximum and minimum water lines, stop filling water.
10.Battery Cable Terminal Connection (for HTC-60H only)
This terminal shall be connected only if the product is equipped with an auxiliary
battery.
The cable terminal in the following picture shall be connected only after the solar
panel is connected with the product.
Water inlet
Upper limit
After injection, tighten the water plug.
Lower
Caution
Initially, the cable
terminal is
disconnected.
This is the state
after connection.